LG Front-Load Washing Machine Error Code: Meanings & Easy Fixes 2026

Seeing a code on your display? This guide explains every LG front-load washing machine error code listed on LG’s US support site, in plain English. For each code, you get what it means, the checks an owner can safely do, and the point where LG’s guidance sends you to service. It also covers why a cycle can run longer than expected, which is a common question but not an error code.

Last reviewed: November 17, 2026. Codes can vary slightly by model. Top-load, pedestal, and combo-only codes are not covered here.

As an Amazon Associate I earn from qualifying purchases

LG front-load washing machine error codes at a glance

CodeWhat it meansWhat to checkWhen to contact LG service
OE The washer cannot drain its water.Look for a kinked or blocked drain hose, and clean the drain filter. If the filter is clear, too many suds can also trigger OE to run a tub clean cycle and use less detergent.Shut the water tap, unplug the washer, and call for service if the code keeps appearing.
IEThe water supply is inadequate.Confirm the tap is fully open and the supply hose is not kinked. With the water off, check the hose-end inlet filter for clogs. To check pressure, compare the flow at another tap.Same general guidance as OE. For low pressure, consider consulting a certified plumber
UE / uBThe load is unbalanced.Rearrange the laundry and restart. For a small load, add a few comparable pieces. For mixed heavy and light fabrics (jeans with t-shirts) or single bulky items (sheets, comforters), redistribute the load. If it appears at the end of a cycle because clothes are too wet, rearrange them, close the door, and press Start/Pause.Same general guidance as OE.
CL Not a fault: the child lock is on.Make sure the washer is powered, then hold the lock key for about three seconds. On some models the lock is two buttons pressed together.If it won’t toggle, contact LG support.
LE The motor is overloaded and locked.Let the washer rest for 30 minutes, then restart the cycle.Same general guidance as OE.
tCLNot a fault: it is time for a tub clean.Run the tub clean cycle with washing machine cleaner. The message can linger for a few cycles, and a monthly tub clean prevents it.Not a service code.
dE The washer cannot lock its door. Possible causes: door not fully closed, misaligned, or a bad latch.Power off and unplug. Hold Start/Pause for five seconds, plug back in, power on, press the door in firmly, and start any cycle. Avoid packing the drum tightly, keep fabric out of the door seal, and do not push down on an open door.There’s no separate service step for dE.
dE1The door is open and not locked. It may display as dE1, del or dEL.Unplug for ten seconds, plug back in, confirm the door is shut and restart.If it persists, shut off the water tap, unplug the washer, and request a repair through 24/7 chat support.
dE2The door is shut but not locking.Same as dE1.Same as dE1.
ceOver-current in the motor circuit. LG attributes it to a short circuit, loose connection, ground fault or power surge.Unplug for ten seconds, plug back in and try a cycle.If it persists, request a repair through 24/7 chat support.
SUDExcess suds were detected.Use less detergent, never more than the detergent maker’s suggested amount.LG lists no separate repair step. The washer adds a suds-reducing cycle (about two hours) and stops if heavy sudsing is detected while spinning.
CDNot a fault: a cool-down indicator after a drying cycle. It applies only to front-load models with a drying function.None needed. It clears when the clothes are removed or Start/Pause is pressed.Not a service code.
FEThe washer is overfilling, usually from a faulty water valve.Turn off both water taps. Power on, press the spin speed button until no spin is selected, then press Start/Pause to drain. Restart once it has drained.If it persists, request a repair through LG’s 24/7 chat.
PEThe water level sensor is malfunctioning.Unplug for ten seconds, plug back in and restart the cycle.If it persists, request a repair through LG’s 24/7 chat.
PFA power failure occurred during the cycle.Unplug the washer, hold Start/Pause for five seconds while it has no power, restore power, and try a cycle.If it persists, request a repair through LG’s 24/7 chat.
tEA heating error, usually from a faulty thermistor.Unplug for ten seconds, plug back in and power on. Press the spin speed button until no spin is highlighted, let it drain, then restart.If it persists, shut off the water taps, unplug the washer, and request a repair through 24/7 chat support.
FFThe washer is frozen.Check the inlet hoses, drain hose and drain filter for freezing. Running warm water into the drum can help thaw the drain hose and pump, and wrapping the supply hose in a warm, wet towel can help too.Same general guidance as OE.
Ed / OPThe problem relates to the easy dispense feature.There’s a dedicated easy-dispense troubleshooting video for this one.There’s no separate service step.

If your code isn’t listed here, LG support can help you identify it directly.

Quick reference chart of common LG front-load washing machine error codes OE, IE, UE and dE

OE and IE: the two water errors

OE means the washer cannot drain, and IE means it cannot fill properly. For OE, start with the drain hose and the drain filter. For IE, check the tap, the supply hose, and the hose-end inlet filter with the water off.

LG front-load washer drain hose and water inlet hose connections at the back of the machine

UE and dE: load and door problems

UE is a load problem you can fix by redistributing the laundry. The dE family is about the door lock: dE1 means open and not locked, and dE2 means closed but not locked.

LG front-load washer door closed with the laundry drum visible, showing the door seal area

Cycle time does not advance (not an error code).

A cycle that runs long, or a timer that seems stuck, is usually normal operation rather than a fault. Cycle length depends on the cycle chosen, load size and weight, fabric type and thickness, suds level, and water temperature. Several things can add time:

  • Options: The extra rinse option adds time. The wash/rinse optimizer also adds time, extending the wash if there is too little detergent and adding rinses if there is too much.
  • Suds: Each automatic suds-removal activation adds roughly 12 minutes, and it can activate more than once.
  • Slow filling: Dirty inlet filters, kinked inlet hoses, and low water pressure can all slow the fill.
  • Heavy loads: Larger loads and thick, heavy fabrics take longer to absorb water, drain, and spin.

Cycles of up to two hours are considered normal, depending on the cycle and options. If it happens with every load regardless of settings, or the drum does not move at all, that points to a service visit for a proper diagnosis.

  • Standard Fit – This washing machine drain hose connection is a standard fit for your washer hose all the way
  • It is burst proof and durable
  • BURST PROOF – Our super-high tensile strength braided stainless steel ensures maximum pressure retaining qualities, comp…

Quotable facts

  • When an LG front-load washer shows SUD, it adds a suds-reducing cycle that lengthens the run by roughly two hours.
  • For an LE code, the guidance is to let the washer rest for 30 minutes before restarting the cycle.
  • CL (child lock) and CD (cool-down after drying) are status indicators, not faults.
  • A ce code reflects overcurrent in the motor circuit, and the first step is to unplug the washer for ten seconds and retry.
  • dE1 means the door is open and unlocked, while dE2 means it is shut but not locking.
  • -TIDE Liquid Laundry Detergent, HE Compatible, ORIGINAL Scent, 64 Loads, 84 Fl Oz, 2.48 L. -Pack of 1. -Package may vary…

Frequently asked questions

What does CL mean on an LG front-load washer?

CL is a status indicator, not a fault. It shows the child lock is active, so the control panel will not accept setting changes. To switch it on or off, make sure the washer is powered, then keep the lock key pressed for about three seconds. On some models the lock is a pair of buttons pressed together rather than a single key. If it will not toggle, contact LG support.

What causes a UE or uB code?

UE and uB both point to an unbalanced load. Common triggers include small loads, single bulky items, large sheets or comforters, and mixes of heavy and light fabrics (jeans with t-shirts, for example). The suggested response is to move the laundry around inside the drum, then restart the cycle. If the load is very small, adding a couple of comparable pieces can help even out the weight.

What does SUD mean, and does it slow the cycle?

SUD means the washer sensed excess suds. It responds by adding a suds-reducing cycle, which lengthens the run by roughly two hours. If heavy sudsing is detected while spinning, the machine stops as a precaution against leaking. The fix is to cut back the detergent until sudsing stops, and never exceed the detergent maker’s suggested quantity. There’s no separate repair step for this code just the detergent adjustment.

What is the difference between dE, dE1 and dE2?

A dE code means the washer could not lock its door; Common causes are an unclosed door, a misaligned door, or a faulty latch. dE1 means the door is open and unlocked, dE2 means it is shut but not locking. For both, disconnect power at the plug for ten seconds, plug it back in, confirm the door is shut, and restart. If either returns, turn off the water at the tap, unplug the washer, and request repair.

Why does my LG washer’s cycle time not advance as expected?

This is usually normal operation rather than a fault. Cycle length depends on the program chosen, load size and weight, fabric type, suds level and water temperature. Extra rinse and the wash/rinse optimizer can add time, and dirty inlet filters can slow filling. Cycles of up to two hours are considered normal, depending on options. If the problem continues with every load, or the drum will not move, request service.

A note on accuracy: This guide is built directly from official support documentation for front-load washers, so everything your manual would tell you about these codes is already covered here no need to dig it out separately.

Electronic Tech

Electronic Tech focuses on practical troubleshooting and buying guides for washing machines and refrigerators. Every guide is built from official manufacturer support pages and checked before publishing, so readers get clear steps they can actually follow. TechElectronicLive.com was founded by Mujtaba.