This guide lists every Bosch washer error code and display symbol that Bosch publishes for its US washers. It gives the meaning of each one, the checks owners can do, and when to call for service. The source material doesn’t specify load type, so this guide covers US models generally.
Table of Contents
Quick answer
Most Bosch codes come down to the water path, the load, or the electronics. Check the tap, hoses, and filters; spread the laundry evenly; use less detergent; and reset the machine by switching it off and on. Several sensor, heating, drive, and leak faults have no owner fix, so call Bosch Customer Support at 1-800-944-2904.
Last reviewed: November 19, 2026. Models vary, and your owner’s manual is the final word for your machine.
As an Amazon Associate, we earn from qualifying purchases.

Bosch washer error codes and symbols
| Code | What it means | What to check | When to contact the manufacturer’s service |
| CL | The child lock is switched on. | Bosch doesn’t publish the deactivation steps for this one. ⁕ | The page gives no service guidance for this item. For anything unresolved, call Bosch Customer Support at 1-800-944-2904. |
| Drum with water-drop icon | The drum needs cleaning. | Look up your owner’s manual for the cleaning method. The code page gives no steps. | The page gives no service guidance for this item. For anything unresolved, call 1-800-944-2904. |
| Flashing pause/play icon | The machine has entered energy-saving mode. | Press the pause/play icon and the display lights up again. | The page gives no service guidance for this item. For anything unresolved, call 1-800-944-2904. |
| Soap-bubble icon | Too much detergent was used. | Mix 1 tablespoon of fabric softener with about 2 cups (0.5 liters) of water and pour it into compartment II. Skip this mix for outdoor clothing, sportswear and down-filled items. Use less detergent next time for the same load. | The page gives no service guidance for this item. For anything unresolved, call 1-800-944-2904. |
| E:00 <-> -18 | The pump is blocked. | Clean the drain hose and/or the drain pipe. The page says pump maintenance may also be needed and points to your owner’s manual. | The page gives no service guidance for this item. For anything unresolved, call 1-800-944-2904. |
| E:00 <-> -23 | There is water in the base and/or the machine is leaking. | Turn off the water tap. | Call Bosch Customer Support at 1-800-944-2904. |
| E:10 / -00 / -10 / -20 (machines with intelligent dosing) | The pump for the intelligent dosing system is blocked. | Put the machine in standby and clean the pump unit (your owner’s manual explains how). Then switch it back on. The manual also explains how to turn the dosing system off until the problem is fixed. | If the code returns or the program will not start, call 1-800-944-2904. |
| E16, E34, F16, F34 | Bosch’s pages give two wordings. The main code list says the door is not locked properly. Two other pages (E16/F16 only) say the door is open. | Close the door until it clicks. A full load can stop it closing. Check for anything jammed between the door and the housing. Restart the program. For E16/F16, if the door is already closed and the code stays, verify it is properly closed. | If the door is already closed and the error continues, call 1-800-944-2904. |
| E17, F17, F29 | Bosch’s pages give three different causes. The main code list says the filters in the water connection or AquaStop hose are blocked, or water pressure is too low. The code index says the pump time ran over. The dedicated E17/F17 page says the water supply time ran over. | Start with the main list’s steps. 1) Turn the tap off. 2) Take the hose off the tap. 3) Clean the filters with a small brush. 4) If there is no AquaStop, remove the hose at the back of the machine, pull out the filter with pliers and clean it. 5) Reconnect the hose and check for leaks. 6) Open the tap fully; about 2.5 gallons (10 liters) per minute should flow. Never put the AquaStop in water, because it contains an electric valve. | If pressure is low, contact a plumber. The dedicated E17/F17 page says to contact Bosch Customer Support at 1-800-944-2904. |
| E18 / F18 | The drain hose is blocked or kinked. | Set the program to OFF and pull out the main plug. Check the hose has no kinks. Loosen the clip at the siphon and carefully remove the hose and any leftover water. Clean the hose and the siphon spigot. Hold the hose in a bucket and select DRAIN. Reconnect the hose to the siphon and check for leaks. Warning: the water may be very hot and can scald. Bosch’s page also describes a pump-cleaning procedure that involves removing the service flap and handling hot water. This guide does not reproduce it. | The page gives no service guidance for this item. For anything unresolved, call 1-800-944-2904. |
| E19 / F19 | The heating time ran over, which can happen for several reasons. | No owner steps are listed. | Call 1-800-944-2904 for a proper assessment. |
| E20 / F20 | The machine detected unexpected heating. | Reset by switching the washer off briefly, then on again. | If it still overheats after the reset, call 1-800-944-2904. |
| E23 / F23 | The AquaStop hose has been triggered, so water may be leaking. | Do not use the machine until it is fixed. Turn the water tap off immediately. | Call 1-800-944-2904 as soon as possible. |
| E25 / F25 | There is a problem with the turbidity sensor. | Bosch gives no owner steps. | Call 1-800-944-2904. |
| E26 / F26 | There is a problem with the analogue pressure sensor, which tells the control board how much water is in the machine. | Do not use the machine until it is fixed. | Call 1-800-944-2904. |
| F27 | There is a problem with the pressure sensor. | Do not use the machine until it is fixed. | Call 1-800-944-2904. |
| E28 / F28 | There is a problem with the flow sensor. | Bosch gives no owner steps. | Call 1-800-944-2904. |
| E:30 / -10 (and/or a tap icon) | Several causes are possible. | Check each one. Low water pressure: contact a plumber. Blocked inlet filters: clean them. Tap turned off: open it. Kinked or jammed inlet hose: straighten it. Water-level measurement fault: wait about 5 minutes for draining to finish, switch the machine off to reset it, then switch it on again. | If the message shows again after the reset, call 1-800-944-2904. |
| E:30 / -20 | Several causes are possible. | Too much detergent: mix 1 tablespoon of fabric softener with about 2 cups (0.5 liters) of water, pour it into compartment II (skip this for outdoor clothing, sportswear and down-filled items) and use less detergent next time. Extra water added: never add water while the machine runs. | A faulty solenoid valve is one possible cause; call 1-800-944-2904. |
| E:30 / -80 | Several drain-related causes are possible. | Clean the drain pipe and outlet hose if blocked. Straighten them if kinked. Install the outlet hose no higher than 39 in. (1 meter). Remove any unsuitable hose extension. Clean the drain pump (your owner’s manual explains how). Screw the pump cap in fully, with its handle vertical. For too much detergent, use the softener mix and lower detergent amount described for the soap-bubble icon. | The page gives no service guidance for this item. For anything unresolved, call 1-800-944-2904. |
| E:36 -10 | Bosch lists the same drain-related causes as for E:30 / -80. | Clean the drain pipe and outlet hose if blocked. Straighten them if kinked. Install the outlet hose no higher than 39 in. (1 meter). Remove any unsuitable hose extension. Clean the drain pump (your owner’s manual explains how). Screw the pump cap in fully, with its handle vertical. For too much detergent, use the softener mix and lower detergent amount described for the soap-bubble icon. | The page gives no service guidance for this item. For anything unresolved, call 1-800-944-2904. |
| E:36 -25 -26 | The drain pump is blocked. | Clean the drain pump (your owner’s manual explains how). | The page gives no service guidance for this item. For anything unresolved, call 1-800-944-2904. |
| E:38 / -25 / -26 | The drain pump is blocked. | Clean the drum. If the code returns, clean the drain pump (your owner’s manual explains how). | The page gives no service guidance for this item. For anything unresolved, call 1-800-944-2904. |
| E32 / F32 | An imbalance was detected. The spin may not run or may slow down, and the machine makes several extra spin attempts, which lengthens the program. | Wash large and small items together. Close zippers and buttons on pillow and duvet covers. | The page gives no service guidance for this item. For anything unresolved, call 1-800-944-2904. |
| E33 / F33 | Foam was detected, caused by too much or old detergent. Foam may escape from the drawer, often with lightly soiled loads. | Use less detergent, especially for lightly soiled laundry, and check the detergent pack for the right amount. | The page gives no service guidance for this item. For anything unresolved, call 1-800-944-2904. |
| E:60 -2B | The load is unevenly distributed and the spin was interrupted. | Redistribute the laundry and mix large and small items where possible. | The page gives no service guidance for this item. For anything unresolved, call 1-800-944-2904. |
| H:32 | The load is unevenly distributed and the spin was interrupted. | Redistribute the laundry and mix large and small items where possible. | The page gives no service guidance for this item. For anything unresolved, call 1-800-944-2904. |
| E56 | There is an unexpected communication error. | Reset by switching the washer off, then on. | If the reset does not fix it, call 1-800-944-2904. |
| E80 | There is a fault in the drive circuit. | Bosch gives no owner steps; only an authorized technician can fix it. | Call 1-800-944-2904. |
| E:92 / -01 | Water pressure is low or the inlet filters are blocked. | Clean blocked inlet filters. Nothing can be done about low pressure itself. | The page gives no service guidance for this item. For anything unresolved, call 1-800-944-2904. |
| H9E with a tap icon | Hot water is not reaching the machine properly. | Confirm the hot hose is connected and open the hot tap. Clear any kink or blockage in the hot supply hose and replace the hose if damaged. Check the hot-water pressure and fix it if needed. Clean the strainer in the supply hose. | The page gives no service guidance for this item. For anything unresolved, call 1-800-944-2904. |
| Any other fault code | Bosch calls it an operational fault. | Switch the machine off and on. If the message returns, disconnect the machine from power for at least 30 seconds and reconnect it. A one-off fault clears. | If it returns, call 1-800-944-2904 and give the exact message. |
Quotable facts
- The support line for these codes is 1-800-944-2904.
- On E23/F23, the guidance is to turn the water tap off immediately and not use the washer until it’s fixed.
- For drain codes, the outlet hose should sit no higher than 39 in. (1 meter).
- A fully open tap should deliver about 2.5 gallons (10 liters) of water per minute.
- For a code with no entry of its own, switch the machine off and on, then disconnect it from power for at least 30 seconds if the message returns.

FAQ
What should I do first when a Bosch washer shows a code that is not listed?
Bosch’s general guidance for codes without their own entry is to switch the machine off and back on. If the message comes back, disconnect it from power for at least 30 seconds and reconnect. A one-off fault will clear. If it returns after that, call Bosch Customer Support at 1-800-944-2904 and give the exact message shown on the display. Note the code before you call.
Why do some Bosch codes show different causes on different pages?
Bosch’s own pages disagree on a few codes. For E17/F17, the main code list points to blocked hose filters or low water pressure, the code index says pump time ran over, and the dedicated page says the water supply time ran over. For E16/F16, one page says the door is not locked properly and others say it is open. Both E16 fixes involve closing the door fully. Check your owner’s manual if unsure.
Which Bosch washer codes mean stop using the machine?
Three codes come with a clear stop-using instruction: E23/F23 (the AquaStop hose has activated and water may be leaking), E26/F26 (analogue pressure sensor) and F27 (pressure sensor). For E23/F23, turn the water tap off right away. In all three cases, call support at 1-800-944-2904. E:00 <-> -23 (water in the base or a leak) calls for the same two steps tap off, then call.
What can I check myself for drain and water-fill codes?
For drain-related codes, clean and straighten the drain hose and pipe, keep the outlet hose no higher than 39 in. (1 meter), and remove any unsuitable extension. For fill-related codes, check that the tap is open, the inlet hose isn’t kinked and the inlet filters are clean. A fully open tap should deliver about 2.5 gallons (10 liters) per minute. Contact a plumber if water pressure is low.

Final Verdict
Across the table, three moves come up again and again. First, check the water path: open the tap, straighten and clean the inlet and drain hoses, and clean the inlet filters. Second, reduce load and detergent problems: spread laundry evenly, mix large and small items, and use less detergent. Third, reset by switching the machine off and on.
For unlisted codes, also disconnect it from power for at least 30 seconds. Where a sensor, heating, drive-circuit or leak fault is listed, or the code returns after your checks, contact support at 1-800-944-2904 and give the exact message on the display. Your next step: find your code in the table, try only the checks listed for it, and call the support line if it does not clear.
Last reviewed: November 19, 2026.


